127mm x 18tpi Pin End Fretsaw Blades
127mm x 18tpi Pin End Fretsaw Blades

127mm x 18tpi Pin End Fretsaw Blades

Stock No: 25511 Part No: FSB2

Features:

Carbon steel with hardened steel teeth with pin ends at both ends. Suitable for cutting wood, plastics, nonferrous metals and most other materials. For use with Draper Fretsaw Stock No. 89334 and 22791 and other manufacturers similar fretsaws.
12 blades per display card.


Pitch18
Width x Thickness2.4 x 0.25mm

  View product in our catalogue: Page 442

View more products in this category

VAT rated at: 20.00%


Brand Info:

The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee.

Find out more about the Draper brands!



These products are associated with Stock No. 25511 and can be purchased separately:


127mm x 18tpi Pin End Fretsaw Blades

127mm x 25tpi Pin End Fretsaw Blades

Carbon steel with hardened steel teeth with pin ends at both ends. Suitable for cutting wood, plastics, nonferrous metals and most other materials. For use with Draper Fretsaw Stock No. 89334 an... more

Stock No 25510 Part No. FSB2
127mm x 18tpi Pin End Fretsaw Blades

127mm x 15tpi Pin End Fretsaw Blades

Carbon steel with hardened steel teeth with pin ends at both ends. Suitable for cutting wood, plastics, nonferrous metals and most other materials. For use with Draper Fretsaw Stock No. 89334 an... more

Stock No 25512 Part No. FSB2
127mm x 18tpi Pin End Fretsaw Blades

127mm x 10tpi Pin End Fretsaw Blades

Carbon steel with hardened steel teeth with pin ends at both ends. Suitable for cutting wood, plastics, nonferrous metals and most other materials. For use with Draper Fretsaw Stock No. 89334 an... more

Stock No 25513 Part No. FSB2

COOKIES ON THIS WEBSITE

This site uses cookies, some of which are necessary to give you a better experience. This site also uses cookies from third party websites, some of which may track your use of this site, If you continue without changing your settings, we'll assume you are ok with this. However, you can change your settings at any time.