Storm Force® Air Tool Kit (68 Piece)
Storm Force® Air Tool Kit (68 Piece)

Storm Force® Air Tool Kit (68 Piece)

Stock No: 83431 Part No: SFATK/68

TSP: £139.95 Ex. VAT | £167.94 Inc. VAT

This item is featured in Power Cat October 2018 which runs until 31st Mar 2019.

Features:

•   Indispensable air tool kit
•   Designed to provide all the essentials for the workshop
•   Includeds a 1/2” inch impact wrench, 3/8” inch air ratchet, air chisel, die grinder and two blow guns along with a host of specialist accessories
•   Stored in a convenient heavy duty storage case

  View product in our catalogue: Page 631

View more products in this category

VAT rated at: 20.00%


Specification:

1/2" air impact wrench
Specification:
Ultimate torque340Nm (250ft/lb)
Free speed7,500 rpm
Operating air pressure90psi (6.2bar)
Average air consumption4.0cfm (114L/min)
Sound pressure level87dBA
Sound power level98dBA
Vibration level3.3m/s2
Min. hose size3/8” I/D
Air inlet1/4” BSP
Weight1.8kgs
3/8" air ratchet
Specification:
Ultimate torque90Nm (66ft/lb)
Free speed160 rpm
Operating air pressure90psi (6.2bar)
Average air consumption5cfm (142L/min)
Sound pressure level94dBA
Sound power level105dBA
Vibration level2.6m/s2
Min. hose size3/8" (10mm)
Air inlet1/4" BSP
Weight1.kg
Air hammer
Specification:
Chisel shank opening10.18mm
Blows per minute4500
Stroke length43mm
Operating air pressure90psi (6.2bar)
Average air consumption4.0cfm (114L/min)
Sound pressure level 95dBA
Sound power level 106dBA
Min. hose size 3/8" (10mm)
Air inlet 1/4" BSP
Weight 1.1kg
Die grinder
Specification:
Collet size6mm
Free speed22,000 rpm
Operating air pressure90psi (6.2bar)
Average air consumption7cfm (198L/min)
Sound pressure level97dBA
Sound power level108dBA
Vibration level0.9m/s2
Min. hose size3/8" (10mm)
Air inlet1/4" BSP
Weight0.58kg

Contents:

  •    1/2” Impact wrench
  •    3/8” Air ratchet
  •    Air chisel
  •    Air die grinder
  •    Air blow gun
  •    Air duster
  •    8 x impact sockets: 12, 13, 17, 19mm, 1/2, 9/16, 5/8, 11/16”
  •    10 x grinding stones
  •    4 x 125mm round shank chisels
  •    5 x 1” sanding drum
  •    5 x 3/4” sanding drum
  •    4mm hex key
  •    Swivel connector
  •    1/4” quick coupler
  •    1/2, 3” long drive extension bar
  •    2 x hand wrench
  •    Mini oiler
  •    Female & male hose connector
  •    Both ends male hose connector
  •    3/8”(F) - 1/2”(M) socket adaptor
  •    1/8” collet
  •    1/4” collet
  •    Male connector
  •    Inflating nozzle
  •    High pressure nozzle
  •    Air hammer spring retainer
  •    Bit holder
  •    7 x female plug
  •    Dual air chuck
  •    Tapered nozzle
  •    Safety nozzle
  •    Rubber nozzle
  •    PTFE tape
  •    Oil pot



COOKIES ON THIS WEBSITE

This site uses cookies, some of which are necessary to give you a better experience. This site also uses cookies from third party websites, some of which may track your use of this site, If you continue without changing your settings, we'll assume you are ok with this. However, you can change your settings at any time.