Air Tool Kit (50 Piece)
Air Tool Kit (50 Piece)
Air Tool Kit (50 Piece)

Air Tool Kit (50 Piece)

Stock No: 84129

This product has been discontinued but limited stock may be available.

An indispensable air tool kit, designed to provide essentials required for the workshop. Included in the kit is a 1/2" impact wrench, 3/8" air ratchet, air hammer, air die grinder and blow gun along with a host of specialist accessories. The air tools are manufactured with a lightweight Aluminium housing attached to an ergonomic soft grip handles (where applicable) and fitted with 1/4" BSP airline connectors. All stored in a convenient blow mould storage case.

Contents:

  • 1 x 1/2" heavy duty air impact wrench
  • 1 x 3/8" air ratchet
  • 1 x 150mm air hammer
  • 1 x 1/4" die grinder
  • 1 x Air blow gun
  • 1 x 50psi air pressure gauge
  • 1 x 1/2" x 200mm extension bar
  • 1 x 1/2" to 3/8" adaptor
  • 6 x Impact sockets: 11mm, 13mm, 14mm, 17mm, 22mm, 25mm
  • 10 x 25mm screwdriver bit - 1/4" / 6.35mm shank
  • 2 x Needle valve adaptors
  • 2 x Chisels
  • 2 x Hand wrenches
  • 5 x Male plugs
  • 5 x Grinding stones
  • 1 x Air hammer spring retainer
  • 1 x Bit holder
  • 1 x Female plug
  • 1 x Dual air chuck
  • 1 x Bit base
  • 1 x Tapered nozzle
  • 1 x Safety nozzle
  • 1 x Rubber nozzle
  • 1 x PTFE tape
  • 1 x Oil pot

Brand:

The Draper range is our standard Draper product, suitable for trades and the enthusiast. Manufactured with quality in mind and comes with our guarantee.

Find out more about the Draper brands!

View product in our catalogue: Page 294

View more products in this category

VAT rated at: 20.00 %

1/2" twin hammer air impact wrench
Specification:
Ultimate torque680Nm (500ft/lb)
Free speed7,000 rpm
Operating air pressure90psi (6.3bar)
Average air consumption6.5cfm(184L/min)
Sound pressure level87dB
Sound power level98dB
Vibration level4.35m/s2
Minimum hose size3/8" I.D
Air inlet1/4" BSP
Weight2.59kgs
3/8" compact air ratchet with stubby yoke
Specification:
Ultimate torque85Nm (60ft/lb)
Free Speed160rpm
Operating air pressure90psi (6.3bar)
Average air consumption4cfm (113L/min)
Sound pressure level87dB
Sound power level98dB
Vibration level4.35m/s2
Minimum hose size3/8" I.D
Air inlet1/4" BSP
Weight1.21kgs
150mm pistol grip air hammer
Specification:
Blows per minute4,500bpm
Stroke length41mm
Chisel shank10mm
Bore diameter (ID)19.05mm (3/4")
Operating air pressure90psi (6.3bar)
Average air consumption6cfm (170L/min)
Sound pressure level99dB
Sound power level111dB
Vibration level10.6m/s2
Minimum hose size3/8" I.D
Air inlet1/4" BSP
Weight2.18kgs
Compact straight die grinder
Specification:
Collet Size6mm (1/4")
Free Speed25,000rpm
Operating air pressure90psi (6.3bar)
Average air consumption4cfm (113L/min)
Sound pressure level88dB
Sound power level99dB
Vibration level2.9m/s2
Minimum hose size3/8" I.D
Air inlet1/4" BSP
Weight0.39kgs

COOKIES ON THIS WEBSITE

This site uses cookies, some of which are necessary to give you a better experience. This site also uses cookies from third party websites, some of which may track your use of this site, If you continue without changing your settings, we'll assume you are ok with this. However, you can change your settings at any time.