230V Plasma Cutter (25A)
230V Plasma Cutter (25A)
230V Plasma Cutter (25A)
230V Plasma Cutter (25A)

NEW 230V Plasma Cutter (25A)

Stock No: 92454

This plasma cutter features microprocessor-controlled inverter technology making it suitable for cutting any electrically conductive material. It is a robust machine with an integrated air regulator and built-in water trap. Features thermal overload protection. Supplied with an earth clamp, chipping hammer with wire brush and face mask.


  • 1 x Plasma torch
  • 1 x Earth clamp (2m cable)
  • 1 x Chipping hammer with wire brush
  • 1 x Mask


The Draper Expert range is our benchmark for quality. Manufactured for the professional or for industrial use and comes with our guarantee.

Find out more about the Draper brands!

View more products in this category

VAT rated at: 20.00 %

Input voltage230V
Input supply13A (3 pin BS approved plug)
Clean cut5mm (mild steel)
Maximum severance cut8mm (mild steel)
Current output10-25A
Open Circuit Voltage370V
Duty cycle25% at 25A
Air required8.8cfm
Dimensions460 x 270 x 345mm

These products are associated with Stock No 92454 and can be purchased separately:

230V Plasma Cutter (25A)

Ceramic Shroud for 78636 Torch

Stock No 80883 Part No. A-IPC40/41-28
230V Plasma Cutter (25A)

Nozzle for 78636 Torch

Stock No 80884 Part No. A-IPC40/41-29
230V Plasma Cutter (25A)

Electrode for 78636 Torch

Stock No 80885 Part No. A-IPC40/41-30
230V Plasma Cutter (25A)

Spare Ring for 78636 Torch

Stock No 80886 Part No. A-IPC40/41-31


This site uses cookies, some of which are necessary to give you a better experience. This site also uses cookies from third party websites, some of which may track your use of this site, If you continue without changing your settings, we'll assume you are ok with this. However, you can change your settings at any time.