200mm Bandsaw (250W)
200mm Bandsaw (250W)

NEW 200mm Bandsaw (250W)

Stock No: 98471

Bench mounted bandsaw ideal for the trade or home workshop. Designed to cut wood, wood derived materials and plastics by means of the revolving endless saw band which is carried on two band wheels. The welded steel body helps to make the bandsaw rigid for additional stability. Fitted with adjustable blade tensioning and tracking for precise cutting. There is a mitre guide for cross cut work. The table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. Supplied with 7tpi blade, parallel rip fence and other accessories.


  • 1 x 7tpi blade
  • 1 x Parallel rip fence
  • 1 x Open ended spanner
  • 1 x Flat head screwdriver
  • 1 x Push stick
  • 2 x Hex keys

View more products in this category

VAT rated at: 20.00 %

No load speed1400rpm
Maximum throat capacity200mm
Cutting depth80mm
Maximum capacity85mm
Cutting speed15m/sec (900m/min)
Table size300 x 360 to 520mm
Bandsaw dimensions335 x 250 x 685mm


This site uses cookies, some of which are necessary to give you a better experience. This site also uses cookies from third party websites, some of which may track your use of this site, If you continue without changing your settings, we'll assume you are ok with this. However, you can change your settings at any time.