Punch and Chisel Sets

Punches and chisels are principally used on metal. They come in a diverse selection of sizes, including fine chisels, perfect for engraving. All sets are perfect for use in garages, vehicle workshops, metal fabrication units and engineering facilities.

Showing 1 - 9 of 9 products
Show
Sort by
Octagonal Parallel Pin Punch Set (6 Piece)

Octagonal Parallel Pin Punch Set (6 Piece)

Expert Quality, special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered head. Supplied complete in steel magazine type case. Carton packed.... more

Stock No: 74712 Part No: 119K
TSP: £52.50 Ex. VAT | £63.00 Inc. VAT
Chisel and Punch Set (5 Piece)

Chisel and Punch Set (5 Piece)

Expert Quality, manufactured from special air hardened chrome vanadium steel for long life. The cutting edges and tips are accurately ground, with specially tempered heads. Packed in plastic holder o... more

Stock No: 13042 Part No: 5HB
TSP: £34.50 Ex. VAT | £41.40 Inc. VAT
200mm Parallel Pin Punch Set (5 Piece)

200mm Parallel Pin Punch Set (5 Piece)

Long pattern with 90mm parallel drive. Display packed in storage wallet.... more

Stock No: 19674 Part No: 5P
TSP: £20.00 Ex. VAT | £24.00 Inc. VAT
Octagonal Parallel Pin Punch Set (5 Piece)

Octagonal Parallel Pin Punch Set (5 Piece)

Expert Quality, special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered head. Display packed.... more

Stock No: 13041 Part No: 119/5
TSP: £24.75 Ex. VAT | £29.70 Inc. VAT
Chisel and Punch Set (7 Piece)

Chisel and Punch Set (7 Piece)

Chrome vanadium steel hardened and tempered with a chemically blacked finish and plastic grips. Supplied in storage roll. Display packed.... more

Stock No: 23187 Part No: CP7NP
TSP: £18.00 Ex. VAT | £21.60 Inc. VAT
Hollow Punch Set 5mm - 13mm Dia. (6 Piece)

Hollow Punch Set 5mm - 13mm Dia. (6 Piece)

Manufactured from quality carbon steel hardened, tempered and enamel painted. Specifically designed to cut clean holes in leather, paper, plastic, wood, etc. Supplied in tool roll. Display packed.... more

Stock No: 25993 Part No: HP6
TSP: £13.25 Ex. VAT | £15.90 Inc. VAT
Chisel and Punch Set (4 Piece)

Chisel and Punch Set (4 Piece)

Chrome vanadium steel hardened and tempered with a chemically blacked finish and plastic grips. Display packed.... more

Stock No: 26559 Part No: CP4NP
TSP: £11.75 Ex. VAT | £14.10 Inc. VAT
Nailset, Centre Punch and Pin Punch Set (3 Piece)

Nailset, Centre Punch and Pin Punch Set (3 Piece)

Chrome vanadium steel hardened and tempered with sandblasted finish. Display packed in plastic holder.... more

Stock No: 72041 Part No: 622/3/PP
TSP: £8.25 Ex. VAT | £9.90 Inc. VAT
Set of Cupped Nailsets (4 Piece)

Set of Cupped Nailsets (4 Piece)

Square section striking head with knurled body and polished ends. Carbon steel hardened and tempered. Display packed.... more

Stock No: 35480 Part No: 622/4
TSP: £7.00 Ex. VAT | £8.40 Inc. VAT

COOKIES ON THIS WEBSITE

This site uses cookies, some of which are necessary to give you a better experience. This site also uses cookies from third party websites, some of which may track your use of this site, If you continue without changing your settings, we'll assume you are ok with this. However, you can change your settings at any time.