Punches

All punches and centre punches have a hardened and pointed end, which enables indentation marks to be applied in material, identifying and highlights where you intend to drill. This helps the drill bit grip and keep true in the material being drilled.

Showing 1 - 12 of 28 products
Show
Sort by
8mm x 300mm Long Taper Pin Punch

8mm x 300mm Long Taper Pin Punch

Expert Quality, engineer's pattern long taper punches, manufactured from special air hardened chrome vanadium steel for long life. Display packed.... more

Stock No: 13418 Part No: 99L
6mm x 250mm Long Taper Pin Punch

6mm x 250mm Long Taper Pin Punch

Expert Quality, engineer's pattern long taper punches, manufactured from special air hardened chrome vanadium steel for long life. Display packed.... more

Stock No: 13417 Part No: 99L
5mm x 225mm Long Taper Pin Punch

5mm x 225mm Long Taper Pin Punch

Expert Quality, engineer's pattern long taper punches, manufactured from special air hardened chrome vanadium steel for long life. Display packed.... more

Stock No: 13416 Part No: 99L
Automatic Centre Punch

Automatic Centre Punch

Expert Quality, heavy duty spring - loaded hardened steel point. Adjustable striking force. Display packed.... more

Stock No: 13612 Part No: GT807
Automatic Centre Punch

Automatic Centre Punch

High grade steel tip and hardened point. Chrome plated knurled brass body. Display packed.... more

Stock No: 14158 Part No: GT808
3mm x 200mm Long Taper Pin Punch

3mm x 200mm Long Taper Pin Punch

Expert Quality, engineer's pattern long taper punches, manufactured from special air hardened chrome vanadium steel for long life. Display packed.... more

Stock No: 13415 Part No: 99L
8mm x 150mm Octagonal Parallel Pin Punch

8mm x 150mm Octagonal Parallel Pin Punch

Expert Quality, special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered heads. Sold loose.... more

Stock No: 51710 Part No: 119
2mm x 150mm Octagonal Parallel Pin Punch

2mm x 150mm Octagonal Parallel Pin Punch

Expert Quality, special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered heads. Sold loose.... more

Stock No: 51645 Part No: 119
2.5mm x 150mm Octagonal Parallel Pin Punch

2.5mm x 150mm Octagonal Parallel Pin Punch

Expert Quality, special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered heads. Sold loose.... more

Stock No: 51653 Part No: 119
3mm x 150mm Octagonal Parallel Pin Punch

3mm x 150mm Octagonal Parallel Pin Punch

Expert Quality, special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered heads. Sold loose.... more

Stock No: 51661 Part No: 119
3.5mm x 150mm Octagonal Parallel Pin Punch

3.5mm x 150mm Octagonal Parallel Pin Punch

Expert Quality, special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered heads. Sold loose.... more

Stock No: 51679 Part No: 119
4mm x 150mm Octagonal Parallel Pin Punch

4mm x 150mm Octagonal Parallel Pin Punch

Expert Quality, special air hardened chrome vanadium steel for long life. The tips are accurately ground, with specially tempered heads. Sold loose.... more

Stock No: 51687 Part No: 119

COOKIES ON THIS WEBSITE

This site uses cookies, some of which are necessary to give you a better experience. This site also uses cookies from third party websites, some of which may track your use of this site, If you continue without changing your settings, we'll assume you are ok with this. However, you can change your settings at any time.